Getting Your Bathroom Heat Just Right
When you’re picking out infrared heaters for a bathroom, you have to remember one thing: you aren’t just trying to warm up the air. Air is slippery; it doesn’t hold heat well, especially when it’s damp. What you actually want is that cozy, radiating warmth that hits your skin and the walls directly. It stops that annoying condensation from building up and keeps you from shivering the second you step out of the shower, all without wasting power on the empty space in the room. Finding the right power There’s no such thing as a “standard” wattage. It all depends on your space. If you’ve got a tiny powder room—maybe 3 to 5 square meters—stick with something small, like 400W to 600W. If you go overboard here, you’re just asking for “hot spots” that feel like a heat lamp at a buffet. Plus, you’ll probably burn out the bulb way faster. For a medium bathroom (6-10m²), 800W or 1200W usually does the trick. If you’re dealing with a massive master bath, you’ll likely need a few 1500W units working together. It’s pretty simple: more wattage means the heat can punch through the humid air and actually reach you. The “Blast Furnace” Problem High-wattage lamps are great because they’re instant. You turn them on, and boom—warmth. But here’s the catch: your electrical circuit. If you plug three 1500W heaters into one residential circuit, you’re probably going to trip your breaker. Not a great way to start your morning. I usually suggest spreading the load. Instead of one giant 2500W monster, try two 1200W lamps spaced apart. It feels much more natural. You get a gentle, enveloping warmth instead of feeling like you’re standing in front of an open oven. Keeping things running One last tip: don’t leave these things running 24/7. These lamps are built for quick bursts of heat, not for idling all day. Grab a thermostat and set it to kick off once the room hits about 22-25°C. Your electricity bill will thank you, and your filaments will last a whole lot longer.